Motion Control Systems Integrator
ABB/Baldor BSM Servo Motors - Brushless

SERVO MOTORS – ABB BSM

Servo motors come in many different sizes and styles to suit a particular application. It is not always necessary to use servo drives and motors from the same manufacturer. It is important to make sure that the ABB-Baldor servo motor is selected to match the application requirements. Please call Highland Controls if you have any questions on how to select a servo motor.

ABB BSM N Series (Brushless Servo Motor)
servo-motor-abb-nThe BSM N series servo motors offer high performance in a compact package. These are low-inertia motors that use rare-earth magnets. There are many different winding choices, so you don’t have to compromise when selecting a motor.

  • Five different IEC sizes (50,63,90, and 100)
  • Available with NEMA mounting
  • Peak torque is four times continuous rating
  • High acceleration
  • Available with multiple feedback options (resolver, incremental and absolute encoder)
  • Optional brake and/or shaft seal

Learn more about ABB BSM N Series and ABB-Baldor servo motors.


ac-brushless-servo-motorABB BSM C Series (Brushless Servo Motor)
The BSM C series servo motors offer good performance at a lower cost. These are medium-inertia motors. There are many different winding choices, so you don’t have to compromise when selecting a motor.

  • Four different IEC sizes (80,90,100 and 132)
  • Available with NEMA mounting
  • Peak torque is three times continuous rating
  • Available with multiple feedback options (resolver, incremental and absolute encoder)
  • Optional brake and/or shaft seal

Learn more about ABB BSM C Series and ABB-Baldor servo motors.


ABB BSM Stainless Steel Series
stainless-steel-brushless-motorsThe BSM SS series servo motors offer high performance in an IP67 package. Low and standard-inertia motors available. There are a variety of winding choices.

  • Five different IEC sizes (50,63,80,90,and 100)
  • Peak torque is three times continuous rating
  • Watertight
  • Non-corrosive housing
  • Available with multiple feedback options (resolver, incremental and absolute encoder)

ABB BSM R Series
ac-brushless-servo-motorThe BSM R series servo motors are an economical solution for lower power applications. Low and standard-inertia motors available. There are a variety of winding choices.

  • Metric and NEMA Mounting
  • Peak torque is three times continuous rating
  • 30, 50, 100, 200, and 400 watt output
  • Resolver or encoder
  • Available with a 24VDC brake

Get more information about servo motors and ABB-Baldor servo motors.


Stober PipeDrive Hollow Bore Servo Geared Motor
hollow-bore-servo-motorThe quiet-running Stober PipeDrive is a hollow-bore servo motor, designed for high-performance applications requiring superior torsional strength and rigidity. Available in either 28 or 38 mm diameter, the hollow bore is very large for such a compact design, allowing a screw to be installed through the shaft. The PipeDrive can be adapted for both direct drive and gear reduction installations, in ratios of 3, 9 or 27 to 1. Forced-air and water cooling are also optional.